|SENPING welcome all companies to talk with us , wherever you are, whatever big or small. we will treat equally to create a bright future for you and us!|
Armoring tape by my company independent research and development of technology, special glass fiber woven into high strength, high flexibility in the structure of the fabric, then in the weaving with water surface coating and curing polymers and made of a fiberglass products. It has the characteristics of fast curing, easy operation and wide application range, and the structure of the cured structure is characterized by high tensile strength, high tensile strength, non-toxic, tasteless, no stimulation, water resistance and corrosion resistance. Because of its easy to use, easy to carry, and arbitrary shaping, in recent years has increasingly is applied to power communication cable accessories, chemical, marine, mining, automobile manufacturing, shipbuilding, statues, medical and other fields.
Armor with a sealed in plastic composite bag, that is used to open, no need of special equipment, simply bandages soaked in water for a few seconds and direct bandaging in cable accessories or cable can be within 10 minutes of complete curing. After 30 minutes can be load-bearing, 1 hour after the can body now perfect mechanical protection performance.
Application: it is suitable for the reinforcement of the outer protecting layer of the cable and the reinforcement of the cable joint and the terminal. Fast water curing or air curing, no odor, non-toxic, not easy to burn, durable, durable, corrosion resistance, high insulation, easy to use, is a special environment for the maintenance of structural repair, protection, corrosion resistance, cable sealing splicing and high temperature use of the ideal materials. Mainly used for waterproof layer of steel armor cable intermediate joint restoration, protection and support to joint structure. In addition to be wound on the metal surface, prevent metal friction and prevent sparking sharp metal surface is scratched.
1. Armoured belt (belt armor and armor belt) for power cable industry in 10kV, 35kV single core or three core shrinkage cable middle connector, can also be used for heat shrinkable cable intermediate joint support.
2 repair with anti-seepage and mending leakage for fast leak repair, especially pipeline repair. With the plastic soil, universal repair etc. with the use of trap material, can increase the pressure by repairing pipes.
3 metal surface insulation protection belt
Can replace the dusting and heat shrinkable sleeve, just wrapped on the surface of the metal, you can form an insulating protective layer, prevent metal frictional sparking and surface from being scratched.
Cold 4 fixing belt for non inflatable communication cable the continued contraction assure technology, ideal mechanical protection of cable joint.
Operation steps: 1, clean the surface of the wound surface. Be sure to wear gloves and then carry out the following operations, along the V shaped groove in the packaging bag. 2, put the water into the bag, squeeze out a few seconds after the tape, tape out excess water. 3, winding.
If used for leak repair, the leakage plugging with traditional plugging material. This step is omitted for other purposes. 2 armored belt along the 45 degree angle direction gradually rolling winding, each around 1 / 3 of that circle of overlapping, and slightly to be hard, wrapped after repeated touch pressure, surface shaping, to increase the adhesive force and cured strength between each layer. The case of diameter suddenly become big or suddenly small place, can be folded belt wrapped armor. 4, in the same way to wrap around 4 to 8 layers, the specific number according to different applications have different. 4, at 20 degrees Celsius, 5 minutes to reach the Non Stick Hand state, 8 to 10 minutes can be cured bearing, 1 hours after the complete cure can be achieved.
Curing water and in the air can also slow curing temperature of 150 DEG C can stick to rubber, PVC, pet, metal, glass fiber and concrete material within 10 minutes of fast curing, in water use water, and most of the chemical solvent and fuel resistant to mechanical abrasion resistant up to 10 kilograms of internal pressures when almost no tension end head automatic jointing with the high performance of packaging materials, is not easy to be damaged.
Note: 1, if the ambient temperature is lower than 0 DEG C, to achieve the curing effect and speed of, please to be wound and armoured with preheating to 2 degrees Celsius above. 2, water temperature 25 degrees Celsius, not more than 50. 3, must ensure that the armored belt in contact with water use, otherwise it will affect the curing after the bonding force and strength. 4, the end of the tape do not stretch, should let the natural bonding. 5, the armored belt ready to use, each time you open a bag (not open at the same time, and the operating bags) within the prescribed period of time. If it is not enough to open another bag continue to operate. 6. The armored belt itself non-toxic, non irritating, but should avoid not cured adhesive tape paste directly in contact with the eyes or skin, so as not to cause discomfort. If you come into contact with tape paste should be rapidly cloth wipe, and then with acetone or alcohol cleaning, or to be curing the slurry will scrape. 3, avoid kneading bags, packaging bags to prevent breakage.
Transportation: to prevent leakage, direct sunlight and rain leaching.
Storage: in the cool dark dry place, storage temperature of 10 to 30.
Period: three years from the date of production