Single & Double sided Mosquito Fly Light Glue Boards for UV lamp

Single & Double sided Mosquito Fly Light Glue Boards for UV lamp

Fly light glue boards are made of cardboard (the thick kind, not the flimsy cereal box stuff), clear tacky glue that won't run in warm air, and a sheet of release paper on top. You peel the paper, and the glue is ready. Single sided means sticky on one face – good for wall mounted units. Double sided? That’s glue on both faces, so bugs coming from the left or the right get stuck. We also do printing on request. You can put a small name or date on one side, or both sides if you want. People ask why printing matters – it’s for tracking when you changed the board, or just branding so the kitchen staff knows which brand works. These glue boards in UV lamp have been sitting inside deli counters and bakeries for months. They don’t look fancy but they grab fruit flies, drain flies, little moths, anything that wanders near the UV light. No zapping, no smell, just sticky cardboard.

Technical Parameters

Key Features

• Cardboard is thick – won't curl after several weeks under a hot lamp
• Glue is aggressive but won't drip, even above a fryer
• Double sided version catches flying pests from front and back – almost twice the catch
• Release paper peels off in one piece, no tearing into little bits
• Can print on one side or both – we use water based ink
• Fits most insect light traps from brands like PestWest, Gilbert, Flowtron, etc.

Product Packing & Shipping

10-20pcs Fly light glue boards go into a clear polybag . Then 100-1000pcs into a standard export carton upon different board size, could paste sticker label on polybag and cartons.If need pallet packing ,it is also ok.

Production time need around 15-25days upon different quantity, and sea shipping time need around 7-40days upon different destination port.

 How to Use

• Turn off your fly light unit and open the cover.
• Take out the old, messy board – wear gloves if you want.
• Grab a new board, find the corner of the release paper, peel it off slowly.
• For single sided: place with sticky side toward the lamp. For double sided: center it so both sides face open air.
• Close the unit and power back on.
• Swap when the board looks full – roughly every three to four weeks.

Applications

• Restaurant fly light traps in back of house
• Supermarket bakery and meat departments
• Nursing home kitchens and dining areas
• Food processing plants (dry zones only – not for wet rooms)
• Veterinary clinics and pet store insect light units
• Home garages with those cheap mosquito traps

Customization Options

• Size: We cut to almost any dimension – just send your current board length and width
• Sidedness: Mix single and double in one box
• Printing: One colour logo, text, or batch code. We print on cardboard before glue goes on
• Release paper: White or light green;
• Pack quantity: 10,20pcs per bag

FAQs

Q: Are these for electric zappers?
A: No, for glue board type fly lights. But some zappers have a tray where you can put a glue board to catch falling dead bugs – that works too.

Q: Double sided boards cost more. Are they worth it?
A: If your unit hangs in the middle of a room, yes. If the lamp is flush against a wall, single sided is fine.

Q: The glue gets dusty after a while – still works?
A: Dust kills stickiness. Change it sooner if your place is dusty. For clean kitchens, glue stays tacky for six weeks.

Q: Can I get a sample before ordering 5000 pieces Fly light glue boards?
A: Yes. Pay shipping, we send several pieces free.

Why Choose Us

We make these fly light glue boards on a simple table top slitter, not a massive robotic line. That means small orders don't annoy us.

No fancy marketing words. You get thick cardboard, good glue, and a release paper that actually releases.

If you want double sided but only need 3000 boards, we run them for you

We answer emails within one day, not one week.

We once had a customer whose fly light took an odd 7.5” x 5.25” size. We made a custom die in two days. That’s what we do.